Sankeg 35 automat
The Sankeg 35 is used to prepare KEG barrels for filling and for filling KEGs with beer, yeast, wine or other bevareges. The Sankeg35 is equipped with automation of two separate positions, in the first are the KEG barrels sanitized and prepared for the filling and in the second position are the KEG barrels filled with the product. The device is equipped with two separate tanks for two types of sanitizing solution (acid + alkaline). Moving KEG barrels between positions is manual.
Operation cycle sequence (position #1)
- Rinsing with hot water;
- Blowing-off with compressed air;
- Heat-up and cleaning with hot lye solution;
- Blowing-off with compressed air;
- Rinsing with hot water;
- Blowing-off with compressed air
- Heat-up and cleaning with hot acid solution;
- Blowing-off with compressed air;
- Rinsing with hot water;
- Blowing-off with compressed air
- Rinsing with cold water;
- Blowing-off with compressed air;
- Sterilization with steam;
- Blowing-off with CO2 (if required);
- Notching with CO2 (if required).
Operation cycle sequence (position #2)
- Blowing-off with CO2;
- Notching with CO2;
- Filling with product.
Note: the operation cycle sequence can be modified at Customer’s request.
Parametres |
|
| dimensions | 1340 x 1465 x 2225 mm |
| weight | 210 kg |
| el. Power | 5,0 kW |
| voltage | 380 V |
| material | AISI-304 |
| protection degree | IP54 |
Capacity |
|
| Capacity (for 50l KEG barrels) | 30 pcs/h |
| number of position (couplers) | 2 |
| Hot water flow consumptions (at pressure 3kg/cm2) | max. 0,3 m3/h |
| Cold water flow consumptions (at pressure 3kg/cm2) | max. 0,2 m3/h |
| Steam water flow consumption (at pressure 3kg/cm2) | max. 5kg/h |
| Compressed air consumption for pneumatic system (required compressed air purity as per GOST 17433, at pressure 6 kg/cm2) | max. 1,5 m3/h |
| Compressed air consumption for kegs blowing-off (required compressed air purity as per GOST 17433, at pressure 2.5 kg/cm2) | max. 2,0 m3/h |
| CO2 consumption (at pressure 2kg/cm2) | max. 5 m3/h |
| Tank capacity for lye cleaning solution | 140 litres |
| Tank capacity for acid cleaning solution | 140 litres |
| Concentration of lye cleaning solution must not exceed 2.5% | |
| Concentration of acid cleaning solution must not exceed 1.5%. | |
Basic parts:
- Pad with pneumatic device for preparing KEGs (2 positions)
- Two tanks with sanitation solutions
- Pumps for circulating of the sanitation solutions.
- Electronically controlled panel with software based on the “FESTO”
The electrical scheme provides automatic production programs, pump control, heating and maintaining the temperature of the wash solution.
The progress of the production program is displayed on the monitor. All main parts of the structure are attached to the frame odyf the vertical spatial structure.
