The brewing set in copper is used for the production of beer wort in both, the infusion as well as the decoction way of cooking. The brewing set kit consists of three containers: a mash kettle and a filter tank which is mounted above a swirl tank. The production of the brewing set per batch is up to approximately 3 300 liters of beer wort (= 3 000 liters of beer).

The mash kettle is equipped with a steam bottom and a steam duplex for a steam heating. To the brewing set V30M, we recommend the gas steam generator VR350.

This brewing set can be made in semiautomatic or fully automatic operating mode. In the semiautomatic mode, all of the valves are manual, except the valves of filling with water and steam. These are pneumatic and controlled from the touch screen. In the fully automatic mode, all of the valves are pneumatic and controlled from the touch screen.  There are several recipes in the PLC, according to which the brewing set will automatically lead the whole process of cooking the beer wort.

 

Controlling:

  1. Semiautomatic
  2. Fully automatic

 

Parameters: Mash kettle

Capacity: 2 649 l
Diemeter: 1 500 mm

  • Steam bottom, steam jacketing – 2x pneumatic steam valve Norgren
  • Lighting
  • Sanitation shower
  • Steam condensate separator
  • Four armed agitator with a gearbox, a motor and a frequency converter
  • Insulation consists of 50mm of plasticized cotton

 

Parameters: Filter tank

Capacity: 2 208 l
Diameter: 1 500 mm

  • Stirrer with a gearbox, a motor and frequency converter: 2 arms 8 blades
  • Filtration bottom is divided in 6 segments for a better demountability
  • Lighting
  • Sanitation shower
  • Filter valve with sight glass, brewer’s grains discharge equipment
  • Insulation consists of 50mm of plasticized cotton

 

Parameters: Swirl tank

Capacity: 2 649 l
Diameter: 1 500 mm

  • Sanitation shower
  • Tangential nozzle
  • Level indicator
  • Fermenting valve
  • Insulation consists of 50mm of plasticized cotton

 

The brewing set includes all the necessary piping and electric installation including the integrated fully equipped and fully stainless steel switchboard, which fits into the whole design of the brewing set. Both of the vessels are provided with a unique upper sanitation manhole, adapted to easy one-hand operation.

It is also possible to equip the brewing set with a vapor condenser with a heat exchanger or with a manhole of the transporter of the grinded malt. The brewing set is mounted on a podium with stairs, a sink with battery and cooling for the samples. Because of the transportation, the brewing set kit is demountable.

 

[table “20” not found /]
to top button