Non-pressure heat-insulated treated cold water tank ZUPV is made of stainless steel AISI 304 and is designed to collect treated water, cool the water and its subsequent use for the cooling of the mash. The heated water from the wort cooler then goes into the hot water tank NHV.
Water is cooled by the spiral exchanger inside the ZUPV in which the glycol ice water circulate from the ice water tank ZLV (ZLV tank is not included in this component). The ZUPV tank is also fitted with a Willo circulating pump, which is used to homogenize the water temperature in a vessel with very low power consumption. For measurement and automation purposes, the container is fitted with a PT100 temperature probe and a pair of MAVE level sensors.
The electrical switchboard can be mounted directly on the tank or can be placed on any wall in the brewery building after installation.
The ZUPV tank also includes a pump with an expansion vessel and Presscontrol pressure switch.
Parameters: parameters can be customized
|Total volume||3 300 l|
|Diameter with insulation||1 400 mm|
|Height||2 900 mm|
|Oval manhole||340*420 mm|
|Inlet and outlet armature||DN 25|
|Vacuum armature - check valve||DN 25|
|Sewerage draining fitting||DN 32|
|Insulation||50mm plasticized cotton wool|
|The insulation surface: ground sheet metal||AISI 304|
|Stainless steel heating spiral||3 kW|
|Circulating pump Willo||40W|
|Main switch||380V 25A|
|Heating element circuit breaker||380V 16A|
|Heating contactor||380V 16A|
|Digital regulator||-15 -135°C Dixel XR20D|
|Regulator circuit breaker||230V 4A|
|Motor starter||230V 1,5-4A|
|Water pump EBARA||CD 0,9KW|
|Expansion vessel||60 l|
|Pump pressure switch||Presscontrol SK13|