Pressure tank with a working volume of 400 liters is a cylindrical vessel with dished ends, laid on 3 adjustable legs. The vessel is designed for fermenting a partially fermented beer, lagering and tapping of beer or other beverages. The tank is made of stainless steel class AISI304 (DIN 1.4301). Welds of inner container surface are ground to Ra = 0.8. The outer sheathing of the container is all-welded. The pressure tank can be produced in several variants, always tailored to the needs of the customer.

The tank can be non-pressurized with a maximum working pressure of 0.5 bar or certified according to PED 2014/68 / EU with a maximum operating pressure of 3 bar. For the Russian Federation, the tank can be certified according to GOST-R.

Upon customer request, tanks can be fitted with additional fittings, such as beverage carbonation armature.

Pressure design options:A: 3 bar
B: 0.5 bar
Inlet manhole options: A: In the side of the tank - standard
B: In the top bottom - non-standard
C: Both
Standard fitting: (AISI304)
Oval manhole 340 * 420 mm
Rotary sanitation showerRTS 25
Level indicatorDN 20
Vacuum / overpressure valveDN 25
Inlet and outlet armature DN 25
Duplex jacketinglightness 12 mm
Polyurethane insulationlightness 50 mm
The insulation surfaceground sheet metal
Sanitary armature DN 25
Blind flangeDN 25, 1 piece
Standard electronic accessories:
Solenoid valve DN 25 for ice water inlet230V 50 HZ
Sensor NTC
Thermostatic regulatorDixell XR 20D
Total height 1 860 mm
Diameter (with insulation)700 mm
Total volume 449 l
Weight without content 140 kg
to top button